Alles voor meetinstrumenten en SKIDbouw Kalibratieservice Meer dan 45 jaar ervaring
Stationary biogas measuring system for discontinuous measurementsCost effective stationary biogas analyser designed for:
The analyser samples dry biogas, pressurized or low pressure gas and can be used for single or dual point sampling of:
Stationary Analyzer for Syngas - Measurements The complete, ready to use analyzer SWG100 Syngas is the industrial solution for: biomass, coal and waste gasification plants cogeneration heat and power engines (CHP) using syngas small...
Stationary Biogas-measuring system for continuous measurements in Ex-zone 2 For use in hazardous area zone 2, with compliance to EN 60079-0, EN 60079-15 and cabinet marking II 3G Ex nA nC IIC T3 Gc The biogas...
Stationary Biogas-measuring system for continuous measurements The complete, ready to use biogas analyzer is the SWG100 industrial solution to be used with: Biogas (anaerobic digestion) plants Cogeneration heat and power engines (CHP) Municipal or industrial...
Stationary biogas measuring system for discontinuous measurements Cost effective stationary biogas analyser designed for: Discontinuous measurement, user settable up to 24 measurements per 24 hours Use in the harsh industrial environment of combined heat and...
Gas flow velocity and flow rate measurement Continuous measurement of flue gas flow velocity (m/sec) using dynamic pressure measurement principle with averaging Pitot tubes
Optical Dust Monitoring System Low cost double pass transmissiometry for process dust monitoring
Low cost ZrO2 IN-SITU probe On stack, in-situ oxygen analysis Low cost probe with heated ZrO2 sensor, for dusty or clean combustion, using the flow guidance (hollow) tube, with or without back-purge and various lengths
O2 & COe in-situ monitoring system for use in hazardous area zone 2 The O2 and COe monitor is dedicated for continuous combustion optimisation at: various industrial furnaces/ovens/boilers, with hazard of explosive atmosphere petroleum refinery...